OKX review

List of contents of this article:

• 1. The computer has a black screen after the failure to reinstall the system?
• 2, What should I do if the computer has a black screen after reinstalling the system?
• 3, Why is the black screen after reinstalling the computer
• 4, Reinstall the computer and start the black screen
• 5, computer reinstalling black screen does not show anything
< /Ul>

The computer has a black screen after the failure to reinstall the system?

1. Reinstall the systemAt that time, if the installed graphics card driver does not match, such as incompatibility with the motherboard of the brand-name machine, the computer will turn on into a black screen state.

2. If your computer has a black screen problem after reinstalling the system, you can try the following solutions: Check the hardware connection: make sure that all hardware connections are normal. Check the power cord, monitor cable, graphics card connection, etc., and make sure that they are all firmly connected.

3. Change the graphics card. Try again when you turn on the power. If the fault persists, remove all the components except the CPU, graphics card and memory stick, and then power up the computer. If it is not due to memory, change to a normal CPU and restart the power-up. If there is still a black screen, it means that the motherboard is broken.

What should I do if the computer turns on the black screen after reinstalling the system?

If your computer has a black screen problem after reinstalling the system, you can try the following solutions: Check the hardware connection: Make sure that all hardware connections are normal. Check the power cord, monitor cable, graphics card connection, etc., and make sure that they are all firmly connected.

Check hardware problems: First of all, you need to eliminate hardware problems, such as making sure that the computer hardware is normal, checking whether the graphics card is plugged in, whether the monitor is connected normally, etc. Check BIOS settings: Enter the BIOS interface and check whether the hardware settings, display options, etc. are correct. If you need to reset, follow the system installation instructions.

Disassemble the computer and check whether the memory, hard disk, power supply, etc. are faulty. If there is a problem, repair or replace it in time.In a word, to solve the problem of power-on black screen, it is necessary to investigate and analyze all aspects to find out the problem. When problems arise, don't give up easily and try various ways to solve them.

After reinstalling the system, the computer's monitor does not support this resolution, resulting in a black screen on the computer. At this time, we can enter the BIOS to make the corresponding settings.

Why the black screen after reinstalling the computer

1. The black screen after reinstalling the system is usually caused by problems with system installation or configuration. The solution is as follows: Check hardware problems: First First, it is necessary to eliminate hardware problems, such as making sure that the computer hardware is normal, checking whether the graphics card is plugged in, whether the monitor is connected normally, etc.

2. The black screen after reinstalling the computer system has the following reasons: check whether the monitor cable is firmly inserted into the host interface. Check whether the contact between the graphics card and the motherboard slot is good. Check whether the computer monitor is damaged. Check whether the CPU fan is running. If the computer still has a black screen, it is recommended to replace the motherboard.

3. In safe mode, you can try to uninstall the recently installed software or drivers, and then restart the computer to see if the problem is solved. Check the monitor settings: After booting in safe mode, check whether the resolution and refresh rate settings of the monitor are correct. Adjust them to be compatible with the monitor.

4. The black screen after the system is restored may be a change in the hardware or software environment before and after the restoration. Suggestion: pressCheck the principles from easy to difficult one by one, and it is recommended to reinstall the system, which is the simplest and fastest way. If the system is successfully reinstalled, it can also rule out the possibility of hardware problems.

5. The editor analyzed that this problem should be in the graphics card, which may be caused by the display does not support the resolution displayed by the graphics card or the mismatch between the graphics card driver and the graphics card after reinstalling the system. The following is a detailed introduction to these two possible solutions.

What to do when reinstalling the computer with the black screen

If your computer has a black screen after reinstalling the system, you can try the following solutions: Check the hardware connection: Make sure that all hardware connections are normal. Check the power cord, monitor cable, graphics card connection, etc., and make sure that they are all firmly connected.

Check whether there is a problem with the computer hardware, such as whether the memory is loose, whether the hard disk is damaged, etc. You can open the computer case to check. Restart the computer. Sometimes restarting the computer can solve the black screen problem. Check the BIOS settings of the computer. Sometimes incorrect BIOS settings can also lead to black screen problems.

Check hardware problems: First of all, you need to eliminate hardware problems, such as making sure that the computer hardware is normal, checking whether the graphics card is plugged in, whether the monitor is connected normally, etc. Check BIOS settings: Enter the BIOS interface and check whether the hardware settings, display options, etc. are correct. If you need to reset, follow the system installation instructions.

After reinstalling the system, the computer's monitor does not support this resolution, resulting in a black screen on the computer. At this time, we can enter the BIOS to make the corresponding settings.

If a black screen appears in the process of resetting the computer, you can try the following method: Wait for a period of time: Sometimes the reset process takes a long time, which may be because the system is doing some complex operations. It is recommended to wait patiently for a period of time. Check the power supply: make sure that the power cord of the computer is firmly connected and the power socket is working normally.

If there is no one-click restore, use the system USB flash drive to reinstall the system. After inserting the USB flash drive, press the DEL key (the notebook is generally F2 or according to the prompt character at the bottom of the screen) to enter CMOS, and enter the BOOT tab to set the USB disk as the first startup item. Restart to enter the USB disk boot menu, select clone installation, and then follow the prompts.



The computer reinstalls the black screen shows nothing

Check the data cable connection: During the computer restart process, you can check the computer and the monitor Whether various data cables, including video output cables, power cables, etc., are firmly connected to ensure that they are not loose or damaged.

After reinstalling the system, the display of the computerThe device does not support this resolution, resulting in a black screen on the computer. At this time, we can enter the BIOS to make the corresponding settings.

The black screen cannot be turned on after the computer reinstalls the system. The black screen cannot be turned on after the computer reinstalls the system. There are several reasons: check whether the monitor cable is firmly inserted into the host interface. Check whether the contact between the graphics card and the motherboard slot is good. Check whether the computer monitor is damaged. Check whether the CPU fan is running. If the screen is still black, it is recommended to replace the motherboard.

If your computer has a black screen problem after reinstalling the system, you can try the following solutions: Check the hardware connection: Make sure that all hardware connections are normal. Check the power cord, monitor cable, graphics card connection, etc., and make sure that they are all firmly connected.

• Step 7: Complete registration
• Once you have completed all necessary steps and agreed to the terms of OKX review, congratulations! You have successfully registered a OKX review account. Now you can enjoy a wealth of sporting events, thrilling gaming experiences and other excitement from OKX review