OKX Wallet Sign up

List of contents of this article:

• 1,OKX Wallet Sign up car drifting skills
• 2, How to drift a car
• 3. What are the drift methods of car drift

Car drifting skills

Manual gear drift: Then use gear shifting to drift. That is, when it's almost time to turn the corner, let the gearbox go down to the next gear, use the left and right direction keys to slowly release the accelerator button. When it's almost out of the corner, put the head of the car straight, release the left and right buttons, and step on the accelerator to drift. You don't need to step on the brake, it's just by inertia to pass the corner.

How does a car drift? Pull the handbrake on the straight road and turn around. Pull the handbrake when turning. When driving on a straight road, step on the brake and then turn.Brake suddenly when turning.

Brake drift: Step on the brake and downshift when cornering to move the center of gravity forward. The steering wheel was slammed to throw out the rear of the car. Hit the steering wheel to correct the cornering angle. Keep the speed to slide to an angle that can be cornered. With the steering wheel, step on the accelerator in an instant to get out of the corner.

Turning drift operation skills Before entering the curve, maintain sufficient speed, gently pull the handbrake, move the center of gravity forward, quickly hit the steering wheel in the direction of the curve, and at the same time step on the clutch and hang the low gear (the accelerator does not loosen, causing the engine to idle at high speed and the rear wheel to lose grip).

Before entering the curve, maintain sufficient speed, gently pull the handbrake, move the center of gravity forward, quickly hit the steering wheel in the direction of the curve, step on the clutch at the same time, and hang in low gear (the accelerator does not loosen, causing the engine to idle at high speed and the rear wheel lose grip). After hitting the direction of the curve, pay attention to using the accelerator to adjust the continuity of the power and maintain balance.

The car needs to be slightly changed. If not, it will be very dangerous for the car. Bullet clutch: When entering the corner, quickly step on and release the clutch, which feels like bouncing, so that the drive wheel loses grip in an instant, and cooperates with the direction and brake to produce side slip.

How to drift a car

1. Commonly usedSeveral car drifting techniques include: a powerful rear-wheel drive car steps on the accelerator and turns the direction when the speed is not very high; pulls the handbrake or steps on the brake when the vehicle turns; and turns the direction after pulling the handbrake or stepping on the brake when the vehicle goes straight.

2. Manual gear drift: then use gear shifting to drift. That is, when it's almost time to turn the corner, let the gearbox go down to the next gear, use the left and right direction keys to slowly release the accelerator button. When it's almost out of the corner, put the head of the car straight, release the left and right buttons, and step on the accelerator to drift. You don't need to step on the brake, it's just by inertia to pass the corner.

3. Choose a car with the right horsepower. For drifting, high horsepower is not necessary, and the fact is true. For any track road condition, the horsepower between 300-550 is enough to meet the drift.The demand is that if the horsepower is too strong, the wheels are easy to slip, so it is difficult to control when drifting.

4. There are two ways of car drifting, one is power drifting and the other is handbrake drifting. The standard ESP body stability system on the car will try everything to prevent it from happening, so if you want to drift, you should choose a car that can turn off the body stability system.

5. The car needs to be slightly changed. If it is not changed, it will be very dangerous to the car. Bullet clutch: When entering the corner, quickly step on and release the clutch, which feels like bouncing, so that the drive wheel loses grip in an instant, and cooperates with the direction and brake to produce side slip.

6. Hit the full direction, step on the clutch, and hang in the first gear. Step on the accelerator and boom the accelerator to make the engine reach a certain speed (the higher the speed, the easier the tire is to slip quickly, generally higher than 5000 rp, because the instantaneous speed of loose clutch will drop quickly. In order to ensure that the rear wheel continues to slip, the high speed is to provide sufficient torque).

What are the drifting methods of car drifting

There are two ways of car drifting, one is power drifting and the other is handbrake drifting. The standard ESP body stability system on the car will try everything to prevent it from happening, so if you want to drift, you should choose a car that can turn off the body stability system.

Brake drift: Step on the brake and downshift when cornering to move the center of gravity forward. The steering wheel was slammed to throw out the rear of the car. Hit the steering wheel to correct the cornering angle. Keep the speed to slide to an angle that can be cornered. With the steering wheel, step on the accelerator in an instant to get out of the corner.

Several commonly used car drifting techniques include: a powerful rear-wheel drive car slamps on the accelerator and turns the direction when the speed is not very high; pulling the handbrake or stepping on the brake when the vehicle turns; and turning the direction after pulling the handbrake or stepping on the brake when the vehicle goes straight.

Drifting is a driving technique, also known as tail swing, in which the driver makes the car slide sideways by over-steering.