1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
Binance market-APP, download it now, new users will receive a novice gift pack.
1. The last way is to reinstall the system directly. When reinstalling, you should choose to format the system disk, or use other restore software such as ghost to restore the system directly.
2. Press the ESC key when the progress bar appears in the one-click restore wizard, and then enter the advanced settings in the menu bar, transfer to DOS, and manually GHOST to restore the WIN.GHO file in the IBM_SERVICE hidden partition.If there is still a problem, it may be that the hard disk has a bad channel. OR YOU CAN ALSO START THE COMPUTER WITH A BOOT DISK WITH GHOST TO RESTORE IT.
3. It depends on the situation. The cost of reinstalling may be huge. Maybe everything on the original hard disk will be finished. If you know DOS and check that the volume label of the C disk (using the dir command) is IBM_SERVICE, you can use IBM's one-click restore installer to repair it, just hold it once.
Driver sprite is very practical for users who do not have a drive disk at hand. Users can In order to extract and back up the drivers in the system through this software to achieve the effect of "cloning".
Let's take a look at the specific steps. Let's take a look at how the editor does it do~ What is the use of installing and downloading the driver sprite on the computer? Driver Genie is a free software for driver management, intelligent detection of hardware and automatic search for installation drivers. It will intelligently check from the Internet according to the system you are using and the hardware on your computer. Find the hardware driver you need.
, pointClick the "Treasure Chest" tab above to see all the functions of the driver elf, including system tools and system optimization, which is a very good practical toolbox.
1. First, try to download the new driver. Please refer to how to find the hardware driver for instructions on finding the driver. If the driver cannot be installed, please try to install it in compatibility mode: 1) If the driver has been installed, uninstall it.
2. It may be a sound card driver problem. Don't worry. Next, I will share with you the reason and solution for the no sound of the headphones inserted in front of the win8 computer chassis.
3. This is related to the driver. Please check whether the driver is not fully installed;If there is no problem with the driver, please check the settings of the Bluetooth device.
4. Driver problem: It may be that the driver of your USB audio device is not properly installed or updated, causing the system to be unable to recognize or use the device. You can try to uninstall and reinstall the driver of the device, or download the latest driver from the Windows update or the official website of the device to see if there is any improvement 123.
5. Next, the editor will introduce to you the solution to the problem that there is no sound when plugging in the headphones in the win1 system.
Windows10 system computer prompt: "Your computer has a problem and needs to be restarted. We only collect some error messages and need to be restarted" The specific situation and corresponding solutions are as follows: Situation 1: The system conflicts with third-party antivirus software.
Default mode 1: Open the main program, insert mobile devices such as USB flash drive/SD card, and the disk symbols, models, capacity and other information of all removable disks in the current computer will be automatically listed in the disk list.
There is a virus in the computer (open Tencent Computer Butler, one anti-virus, one scan and kill). If you kill a Trojan horse or virus, you should restart immediately. After restarting the computer, go to "Isolation | Recovery" and completely delete the Trojan horse and virus! 2.
Keep clicking F8 when bootingKey, enter the system operation menu, select "Last Correct Configuration", restart the computer, and see if it can be solved.
Use CD-ROM to reinstall the system. The operation steps are as follows: (1) Prepare the system CD-ROM: If not, you can go to the computer store to buy it, and buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
Your situation may be that there are bad clusters, viruses, disk controller errors, and memory problems in the virtual memory page file. Check whether the hard disk and memory are damaged. If there is no problem with the hardware, you can try to reinstall the system on the USB flash drive.
657.43MB
Check663.97MB
Check976.78MB
Check712.43MB
Check972.54MB
Check339.36MB
Check417.38MB
Check532.78MB
Check653.22MB
Check659.23MB
Check878.84MB
Check379.58MB
Check184.34MB
Check569.72MB
Check129.23MB
Check223.98MB
Check457.28MB
Check474.14MB
Check134.53MB
Check632.61MB
Check223.37MB
Check674.85MB
Check776.39MB
Check413.74MB
Check799.63MB
Check316.34MB
Check444.45MB
Check218.37MB
Check217.11MB
Check426.66MB
Check633.55MB
Check894.53MB
Check763.85MB
Check299.42MB
Check876.17MB
Check857.86MB
CheckScan to install
Binance market to discover more
Netizen comments More
1853 各个击破网
2025-02-01 04:46 recommend
2807 干父之蛊网
2025-02-01 04:22 recommend
2540 和气致祥网
2025-02-01 03:25 recommend
125 诲奸导淫网
2025-02-01 02:40 recommend
2505 眈眈逐逐网
2025-02-01 02:34 recommend