Binance market

List of the catalog of this article:

• 1, Why are the windows of cars in Hong Kong transparent
• 2. Why does the car have a transparent film on the body? What are the benefits?
• 3, What car is orange leather inside, the roof is transparent glass
• 4. Introduction of Transparent Car
• 5, What is a car with a "transparent chassis" function? What's the function?
• 6、 How can the transparent car door bowl film be easily torn off?

Why are the windows of cars in Hong Kong transparent

The windows of cars in Hong Kong are transparent, mainly because the Hong Kong government stipulates that the windshield of cars and the driver's seat The window glass on the side of the car must have a light transmittance of 75% and 70% so that the police can better see the situation in the car when performing official duties. At the same time, this is also to protect the privacy and safety of the people in the car.

The Hong Kong Government and the Department of Transport have stipulated that the light transmittance of the windshield and the window glass on both sides of the driver's seat should reach 75% and 70%. For cars with rear mirrors on both sides of the exterior, the light transmittance of the rear glass can be less than 70%.

Films are also common in foreign cars, but traffic regulations prohibit dark films on front windows and front and rear gears, so as not to affect the driver's vision safety! In China, dark film is common for the whole car.

What are the benefits of why car body transparent film

1. Car film is a kind of transparent plastic The material film can be attached to the body surface of the car.It has many functions: protecting car paint: car film can protect the car paint from sunlight, rain, sand and dust and other factors, thus prolonging the life of the car paint.

2. Excellent ductility: The quality of the ductility determines whether the car paint protective film fits perfectly on the car body. After all, the curvature of each part of the car body is different. Like UPPF paint protective film, the top brand automotive paint protective film is made of tpu material.

3. Protect the paint on the surface of the car from fading and paint removal. Effective protection of car paint can also improve the gloss of car paint itself. The most important thing is that it lasts for a long time, and the materials used are environmentally friendly and harmless.

4, (4) It can resist long-term damage to the paint surface, such as grease, weak alkali, gravel, acid rain, etc.(5) Super softness and memory, which can resist general scratches and friction. ( 6) Good UV resistance, prevent long-term damage to the car paint; protect the gloss of the original car paint.

Which car is orange leather inside, and the roof is transparent glass

1. The orange interior has Haval h1, Ruifeng s2, s5, Bluebird, etc., but this can be modified later.

2. Bentley Flying. Bentley is a British luxury car brand headquartered in Crewe, England. In 1919, Mr. WO Bentley founded Bentley Motor Company. Among them, Bentley's orange roof is Bentley Flying.

3. The BMW roof of Pacific Automobile Network is made of soft enameled plastic.Quality, the roof of this material is used because the roof of this material has good chemical stability, good impact resistance, and will not rust. At the same time, it has good transparency and wear resistance. The BMW 320 roof material is fiber material. Some models of BMW m3 have carbon fiber roofs, some models.

4. The country's first Haval big dog real car has now arrived in the store. The new car is positioned as a compact SUV, which is the same product of the lemon platform as the third-generation Haval H6 that has just been launched. Focusing on 3/4 scale cars, it will open up new market segments after listing in the future. According to the factory's previous plan, the new car will be officially launched within this month.

5. Tesla's all-glass roof. In November 2016, Tesla announced improvements to the latest Model S and Model 3, and the latest models of the two models were replaced with full-glass roofs.

6. However, BYD Han did not use a glass roof, so the height of the car was only reduced to 1495mm, so in order to look shorter visually, Han deliberately increased the width of the body to neutralize, and its width exceeded 1.9 meters.

Introduction to transparent cars

Fiberglass transparent vans are often called transparent vans. It is a special van whose body is made of fiberglass material, so that the body has a transparent effect. Transparent vans are mainly used for special occasions such as display and publicity activities, tourism, wedding celebrations, etc.

I'm talking about the chassis perspective function of Nazhijie U5. Help tips to avoid manhole covers, potholes, rugged roads, etc. Even if you are a novice on the road, you can easily cope with them.

In addition to the rear of the car, the researchers said that other parts of the car are also being made transparent. For example, the door part of the car. Transparent doors allow truck drivers to see the cyclist next to them at the intersection, improving safety. This design can greatly reduce the number of vicious traffic accidents that cause casualties.

What is a car with a "transparent chassis" function? What's the function?

I'm talking about the chassis perspective function of Nazhijie U5. Help tips to avoid manhole covers, potholes, rugged roads, etc. Even if you are a novice on the road, you can easily cope with them.

Transparent chassis is an embodiment of optimizing 360-degree panoramic images. For Xiaopeng G3, the upgraded transparent chassis function is very practical for vehicles to bypass well covers or potholes.The upgraded system also adds views of the left and right sides of the vehicle, which is convenient for the driver to understand the road conditions of the blind spots on both sides of the vehicle.

degree to control the whole situation and calmly cope with multifaceted life. In the end, the transparent chassis function is to provide drivers with 360-degree road condition literacy and further improve the driving safety factor. In fact, this transparent chassis function is only an integral part of the 360° holographic body imaging system of the third-generation Haval H6.

How can the transparent car door bowl film be easily torn off?

[Pacific Automobile Network] You can first heat it with a hair dryer and tear it off. After tearing it off, the glue will fall off on it. Buy some tar detergent, spray it and soak it for a minute. Take a towel and wipe it clean.

You can tear it off with a hair dryer when heating.After tearing off, the glue will fall on it. Buy some tar detergent, spray it, soak it for a minute, and then wipe it off with a towel. Door-to-door film is to put a layer of protective film on the door bowl (the protection principle is similar to our mobile phone film). The protection area is small and easy to be scratched.

Wait for the summer to expose the car outside and tear it slowly while it's hot. Find an electric hair dryer to blow and tear. First, slightly bake the edge of the protective film with a lighter flame, and the edge of the protective film will be slightly warped. Then use your nails to remove the film, pick up the edge, and then pinch the edge of the protective film to tear it off.

You can first tear it off while heating it with an electric hair dryer. After tearing it off, the glue will fall off on it. Buy some tar detergent, spray it and soak it for a minute. Take a towel and wipe it clean.

Wait for the summer to expose the car outside and tear it slowly while it's hot.Or find an electric hair dryer to tear while blowing.

To clean the glass with a defogging heating line, we can use hot water and detergent, use a rough rag or a rag to clean the interior of the car, and clean it slowly. Of course, if you stick a film that is a little worse, there will definitely be a film that can't be torn cleanly on it. We can tear it little by little with a blade, and be careful not to scratch the heating line.